Quality & Durability - TJM
TJM was founded in 1973. TJM were pioneers and were the first company in Australia to manufacture and distribute quality 4WD equipment.TJM product range has extensively grown to include; TJM Pro Lockers, TJM Bumpers, TJM recovery equipment, TJM winches, TJM XGS suspension, Airtec snorkels, bars, side and rear protection bars, side steps, trade racks, roof racks, and TJM roof top tents & awnings. While TJM has grown to be a sophisticated operation, TJM has never forgotten the key elements that resulted in the formation of the brand.
Trust: from the quality of manufacturing.
Pride: innovative designs.
Adventure: experiencing the extreme 4x4
TJM AIR LOCKERS
Experiencing life outdoors is best achieved behind the wheel of a 4x4. But, why is that when you finally take your 4WD out of suburb onto what’s meant to be its home-turf that even the smallest obstacle becomes too challenging for your brand new, shiny 4x4? Well, it’s all about traction. Traction describes the relationship or grip that your tires have with the ground, and loss of traction is the 4x4’s number one enemy. Without traction, your prized vehicle will be about as useful as an exercise bike at a suburban gym. Even though you've purchased a 4x4, its factory differential is designed for road use. To prevent premature wear on tyres, it allows for easy cornering by delivering torque to the wheel experiencing the least resistance. This process works well on bitumen, but when you go off-road, your engine will send all its power to the wheel that comes off the ground, essentially, leaving you powerless.
The TJM Pro Locker solves this problem with the flick of a switch. An innovative air locker, the Pro Locker effectively locks “traction-less” wheels and subsequently, the other wheels work harder to get you out. The Pro Locker allows you maximum traction and drive from all four wheels giving you the best possible chance of tackling formidable terrain. And all without getting your feet dirty. With the Pro Locker installed, you may never get stuck again.
- Steel construction
- Lower wing and centre guards
- Designed for optimal approach angle
- Integrated L.E.D. fog lights
- L.E.D. indicator/park lenses
- Air vents & winch viewing slots
- Re-inforced T-Slot recovery jack points
- Polyurethane bumperettes*
- 8000KG rated recovery points*
- Integrated winch mount
- Accommodates large driving lights
- Provision for dual aerials*
- Provision for parking sensors*
Every situation is unique, and the right equipment and a well thought out plan are the key ingredients to successful vehicle recoveries. Designed by engineers and manufactured to the highest standards, TJM recovery equipment is the ultimate backup plan to ensure you can continue your journey.
TJM SNORKEL KITS
TJM Pro Lockers are innovative air operated differential lockers that allow you to send equal drive to both wheels.
- Unique one piece cross shaft (instead of the usual three) with hardened thrust washers.
- Larger pinion gears are used in comparison to most standard differentials.
- No carrier modification needed (other than the drilling and tapping of a bulkhead fitting port)
- Large pre-tensioned 3/8” bolts hold the pro locker hemisphere together.
- Air operated piston style actuator eliminates the possibility of oil being pumped into the airline.
- Separate pneumatic system that has no internal 'o' rings or oil seals adding to its operational simplicity and low maintenance.
TJM SUSPENSION KITS
4WD’s have factory-engineered suspension but it’s usually only enough to accommodate a boot load of gear and general road driving or limited off-road driving. Given the importance of suspension, it’s surprising how frequently people place priority on installing bull bars, roof racks and other 4WD accessories without even considering their suspension needs. Installing a set of shock absorbers, a pair of springs or a full TJM XGS suspension kit will immediately transform your vehicle’s ride, handling, load carrying and towing capabilities. So don’t forget to talk with your local TJM store about your individual suspension needs.
TJM SNATCH STRAPS
The TJM snatch strap is a vital part of any 4WD recovery kit. The combination of vehicle pull and the tension in the strap creates a snatching effect that can pull a stranded vehicle free from being bogged.
During a snatch strap recovery, extreme kinetic energy is generated, so to ensure the highest level of safety, TJM snatch straps are designed to break before reaching excessive and dangerous loads above and beyond the strap rating. Many straps in the industry do not break under extreme force, resulting in significant chassis damage or the potential for bow shackles to shoot off as deadly projectiles.
› Available in 4 rated strengths
› Dual neoprene protective sleeves
› Reinforced eyelets on both ends
› High visibility colors
› Identifiable breaking strengths on each strap
› Numbered for quality control
UP TO 33,000 lbs
OTHER TJM ACCESSORIES